西门子S120传感器SMC20模块6SL3055-0AA00-5BA3

现货 现货现货 实拍图 

西门子代理商现货供应 

原装正品  质保一年

上海斌勤电气技术有限公司

发布人：康奎 （销售经理）发布

本公司签约正式的销售合同，并开具13%的增-值-税-发-票。

外地客户统一采用快递发货,也支持上门提货，货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!

在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!

产品均为密封包装，外包装详见产品图片，白色标签上均有产品订货号和产地，各位买家在收到货后，请核对型号，无误后再拆包装、

本公司宗旨：本着以诚信为本，以顾客为中心.质量保证·服务诚信·价格实惠.

为用户提供专业的自动化产品及服务！

相关西门子产品技术：

SMC20 Sensor Module Cabinet-Mounted

The SMC20 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC20.

The following encoder signals can be evaluated:

Incremental encoder sin/cos 1 Vpp

Absolute encoder EnDat 2.1

SSI encoder with incremental signals sin/cos 1 Vpp (firmware version 2.4 and later)

The motor temperature can also be sensed using a PTC thermistor KTY84‑130, Pt1000 1) or PTC.

1) The Pt1000 sensor is not supported when combined with a Control Unit CU305.

设计

The SMC20 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:

1 encoder connection including motor temperature sensing (KTY84‑130, Pt1000 1) or PTC) via SUB‑D connector

1 DRIVE-CLiQ interface

1 connection for the electronics power supply via the 24 V DC supply connector

1 PE/protective conductor connection

The status of the SMC20 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC20 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail according to EN 60715 (IEC 60715).

The signal cable shield is connected via the encoder system connector and can also be connected to the SMC20 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used as a strain relief mechanism.

1) The Pt1000 sensor is not supported when combined with a Control Unit CU305.