西门子7KG9661-1FA30-1AA0数字测量变送器

数字测量设备 变送器 SICAM T， 不带显示器的凹顶导轨装置， 外壳 96mm x 96mm x 100mm， IP20，2 个二进制输出端， 以太网接口，带 Modbus TCP， 欧姆分压器， 4 个模拟输出端， 串行接口/通信协议 RS485/IEC60870-5-103/Modbus RTU。

西门子代理商现货供应 

原装正品  质保一年

上海斌勤电气技术有限公司

发布人：康奎 （销售经理）发布

本公司签约正式的销售合同，并开具13%的增-值-税-发-票。

外地客户统一采用快递发货,也支持上门提货，货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!

在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!

产品均为密封包装，外包装详见产品图片，白色标签上均有产品订货号和产地，各位买家在收到货后，请核对型号，无误后再拆包装、

本公司宗旨：本着以诚信为本，以顾客为中心.质量保证·服务诚信·价格实惠.

为用户提供专业的自动化产品及服务！

相关西门子产品技术：

应用

Conversion and integration of measurands into substation automation, protection or SCADA process via RTU and/or via protocols IEC 61850 (for 7KG9662 variant), MODBUS TCP, IEC 60870-5-103 for further control and/or monitoring tasks

Monitoring of lower voltage levels and heavy load control, e.g. air conditioning and motors

Depending on the device type, the input circuits for voltage measurement are either designed as voltage dividers or they are galvanically isolated. Devices with galvanic isolation can be used without voltage transformers in the power systems IT, TT and TN. Devices with a voltage divider can also be used in these power systems; for IT power systems, however, an upstream voltage transformer is required.

功能

Device type

Top-hat rail mounted device

Plastic case 96 mm × 96 mm × 100 mm / 3.78 in. x 3.78 in. x 3.94 in. (W × H × D)

Degree of protection: IP20

Input and output circuits

4 inputs for alternating voltage measurements

3 inputs for alternating current measurements up to 10 A continuous

4 optional DC analog outputs freely configurable:

Direct currents: 0 mA to 20 mA, 4 mA to 20 mA and -20 mA to 20 mA

Direct voltages: 0 V to 10 V and -10 V to 10 V

Individually programmable binary outputs

Signalization LEDs

Automatically monitor the functions of its hardware, software, and firmware components.

Communication

Ethernet: IEC 61850 or MODBUS TCP communication protocol

Optional serial RS485 interface that enables the device to communicate via the MODBUS RTU or the IEC 60870-5-103 communication protocol.

Measurands

The following measurands can be recorded or calculated from the measured quantities:

TRMS (True RMS) for alternating voltage and current

Active, reactive and apparent power

Active, reactive and apparent energy

Power frequency

Phase angle

Power factor and active power factor

Voltage and current unbalance

Mean value of the 3 phase voltages: Vavg

Mean value of the 3 phase currents: Iavg..

Time synchronization

For a common time basis when communicating with peripheral devices and time stamping of the process data.

External time synchronization via Ethernet NTP

External time synchronization via field bus using the MODBUS RTU or the IEC 60870-5-103 communication protocol

Internal time synchronization via RTC (if external time synchronization is not available).

Response time for analog and binary outputs

The faster response time of the analog and binary output is a very important feature of SICAM T that enables a reliable reaction of the controlling applications. The response time of the device is 120 ms at 50 Hz and 100 ms at 60 Hz.