西门子工业以太网线Profinet总线电缆4芯

西门子代理商大量库存 现货 

西门子代理商现货供应 

原装正品  质保一年

上海斌勤电气技术有限公司

发布人：康奎 （销售经理）发布

本公司签约正式的销售合同，并开具13%的增-值-税-发-票。

外地客户统一采用快递发货,也支持上门提货，货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!

在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!

产品均为密封包装，外包装详见产品图片，白色标签上均有产品订货号和产地，各位买家在收到货后，请核对型号，无误后再拆包装、

本公司宗旨：本着以诚信为本，以顾客为中心.质量保证·服务诚信·价格实惠.

为用户提供专业的自动化产品及服务！

相关西门子产品技术：

SIMATIC NET PROFIBUS CP 5711 Released for Delivery

Entry

Associated product(s)

The CP 5711 communication processor is herewith release for delivery. Please note: The following approval has not yet been obtained: cULus - The approval and the certif ...

The CP 5711 communication processor is herewith release for delivery.

Please note:

The following approval has not yet been obtained:

cULus - The approval and the certificate are expected by mid. May 2009.

1. Product description

The CP 5711 is an innovation of the existing SIMATIC NET CP 5512 for PGs/PCs with USB V2.0 ports. With its USB V2.0 connection, the CP 5711 can be used on many different computer platforms.     

Innovation of the PG/PC connector technology for USB V2.0:

The CP 5711 is connected via a USB V2.0 port, allowing flexible use of the module. USB V2.0 is available on many computer platforms and applications for the CP 5711 are therefore manifold. The CP 5711 can also be used on a USB V1.1 port, but the performance will be lower in this case.

Functionally compatible with the CP 5512, as well as PC Adapter USB

Applications created for the CP 5512 can be used for the CP 5711 without any changes to the configuration or the user software.

The CP 5711 is functionally compatible with the PC Adapter USB for engineering applications (e.g. STEP7)

+ 5 V Power supply from USB V2.0

The communication processor is supplied with power from the USB port of the PC system.  

+24 V optional external power supply

The external 24 V power supply covers two application areas:

        - The power supply from the USB V2.0 port is not sufficient (power supply of the PC is too weak; USB ports are not designed for 500 mA USB standard)

        - PROFIBUS Termination is assured even when the USB cable is disconnected (active supply of the PROFIBUS connection termination)

SIMATIC S7 or SITOP power supplies can be used to provide the external voltage supply.

Mechanical USB latching

Additional mechanical latching of the included USB connecting cable on the housing of the CP 5711. This safeguards the USB connection in the case of mobile use and also for applications in switchboards.

Diagnostic information via LEDs

Five LEDs are available on the CP 5711 communication processor to provide extensive diagnostics (power USB, power external, identify, Link/SF and Activity.

    - Power USB = module is supplied with 5 V from the USB port

    - Power Ext = module is supplied with 24 V from an external source

    - Identify = USB identification phase - startup phase of the module

    - Link/System Fault = two-colored LED (green/red) providing the user with status information:

                        - the LED lights up green when subscribers are identified on the connected PROFIBUS network (Link Status).

                        - the LED lights up red if an error occurs on the CP 5711.

- Activity = the module has synchronized itself on the PROFIBUS network and the PROFIBUS token is available on the PROFIBUS network.  

Mounting on a mounting rail (with optional accessories)

A separate mounting bracket is available for use of the CP 5711 in switchboards and mounting on 35 mm standard rails.

The existing CP 5512 module with Cardbus technology will continue to be sold in parallel with the CP 5711. Our customers thus have flexibility and can decide freely whether they wish to use a vacant Cardbus slot, or a USB port to operate the relevant SIMATIC NET communication processor. An additional area of application are PC-based systems with no separate card slot and only USB ports.

2. Ordering data

Product Name Order No. Remark

CP 5711 6GK1571-1AA00 CP 5711 Hardware, operating instructions, USB cable

CP 5711 + MPI cable 6GK1571-1AM00 CP 5711 Hardware, operating instructions, USB cable, 5 m MPI cable

Mounting rail bracket for CP 5711 6GK1571-1AA00-0AH0  

3. Target applications

Target applications for the SIMATIC NET CP 5711 are service and engineering (e.g. with STEP 7 for plant commissioning). Other options include customer applications (e.g. HMI, SCADA, PC-based controllers, etc.) on PC systems with a USB port.

Application area:

- STEP 7 with V5.4 SP 5

- WinCC

- WinCC Flexible 

- Micro/WIN

- SOFTNET-DP with Version 7.1 + SP1

- SOFTNET-S7 with Version 7.1 + SP1

- SOFTNET DP Slave with Version 7.1 + SP1