原装白光938焊台HAKKO938ESD智能无铅焊台T10-D24
深圳市佶之达科技特价供应HAKKO938ESD，售完即止。
HAKKO938电焊台具有如下特点：
    90 W 功率: 大小焊点或无铅焊接, 均能应付自如.
    插片式温度控制: 防止随意改动焊接温度
    温度补正功能: 当焊咀实际温度与设定温度有误差时,只需输入补正值, 焊台即会补正焊咀温度.
    27 V 低压输出: 能保护敏感组件
    省电功能: 两种模式, 可设定15分钟待机, 温度自动降低到200度,或设定30分钟待机, 发热组件的电源自动关闭.
    数码操作: 数码式调温及温度显示
    复合式焊咀设计: 升温快速, 容易更换
    防静电: 拆消静电设
    
    
     Applicable from a microsoldering to a heavy soldering
    
     Lead-free soldering compliant
    
     Card lock for reliable temperature control
    
     Easy temperature offset by the digital function.
    
     Error outputs on the display with buzzer beep tones
    
     ESD-safe
    
    
    Top of page
    
    
    
    Part No. Packing List
    No. 938 HAKKO 938 Soldering Station, HAKKO 917 (Soldering Iron w/ Tip Shape 2.4D), Power Cord, Iron Holder (w/ Cleaning Sponge), Card, Joint Band, Heat Resistant Pad, Instruction Manual
    
    
    
    
    Power Consumption 100W
    Temperature Range 200-450°C/ (400-840°F)
    
    Soldering Station
    Output 27V 3.4A
    Outer Dimensions 100(W) x 106(H) x 188(D)mm
    Weight 2.5kg
    
    HAKKO 917 (Soldering Iron)
    Power Consumption 90W (27V)
    Standard Tip T10-D24 (Shape 2.4D)
    Tip to Ground Resistance < 2Ω
    Leak Voltage < 2mV
    Cord 1.2m
    Total Length (w/o Cord) 175mm (when the Shape 2.4D tip is attached)
    Weight (w/o Cord) 45g (when the Shape 2.4D tip is attached)
    * The temperature above is measured with HAKKO 191.
    * This product is ESD-protected.